Saint-gobain-vidros PFD1 Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 19
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
PFD1/PFS1 OPERATING INSTRUCTIONS
INDEX DATE
03 27/09/01 DC01020US
2/11
Thank you for selecting a SAINT-GOBAIN PERFORMANCE PLASTICS ASTI model PFD1 AstiPure™
pump, series 2 (or PFS1: slurry applications).
I General
I.1 Introduction
The Model PFD/PFS is a pneumatically operated TEFLON
®
pump. There are no internal or external
metal parts.
The pump is designed for handling corrosive, inflammable and sterile fluids. It meets the requirements of
the semiconductor, pharmaceutical and chemical industries.
I.2 Materials
All wetted parts are manufactured in TEFLON
®
PFA HP and PTFE.
Other parts are made of high-tech plastics such as PVDF, PEEK etc.
There are no metal parts.
I.3 Operation
The pump is pneumatically operated; two bellows joined by a central shaft reciprocate horizontally. The
suction and delivery strokes alternate from one side of the pump to the other.
The pump is self-priming and has four balls, which seat on lip seals (check valves).
The pumping frequency of a bellows pump is much slower than an equivalent diaphragm pump and
results in an extended life for the bellows.
Pulsation dampers with wetted parts in TEFLON
®
PFA and PTFE are available as an option. This
dampens the pulse by approximately 65 to 80%. The pulsation damper for the PFD1/PFS1 pump is
AMC1/AMS1.
I.4 Pump Data
Flow rate 2.5 GPM (600 l/h)
Discharge pressure 58 PSI max. (4 bar)
Suction head 10 feet water column (3 m)
Max. air consumption 6 SCFM (10 m³/h) NTP
Connections 3/8”x1/2” or 10x13 mm TEFLON
®
flared tube or 1/2” MNPT thread.
Air connection 1/4" I/D gas female thread
Tubing 3/32”x5/32” (2.5x4 mm) maximum
10 feet (3 m) < length < 20 feet (6 m)
Weight 4.5 lbs (2 kg)
Also available three larger capacity pumps with optional pulsation dampers:
PFD2/PFS2 Flow rate 5 US GPM (20 l/min) AMC2/AMS2
PFD3/PFS3 Flow rate 12.5 US GPM (50 l/min) AMC3/AMS3
PFD4/PFS4 Flow rate 25 US GPM (100 l/min) AMC4/AMS4
II Quick checklist
II.1 Shipment
Pumps are cleaned and assembled in our clean room, then double sealed in plastic bags to ensure they
are not contaminated in transit. They are then packed in cartons with Polyethylene protection.
Vue de la page 2
1 2 3 4 5 6 7 8 ... 18 19

Commentaires sur ces manuels

Pas de commentaire